V-Band Clamp Sizing Information: Our V-Band Clamp sizing is in reference to the intended matching tube size diameter, not the clamping range of the clamp itself. This specific V-Band Clamp is intended to be used with 3.000" ID V-Band Flanges (matching tube size: 3.000" OD) and will accept V-Band Flanges with an overall OD of 3.570"
Our 304 Stainless Steel V-Band Clamps are manufactured in an ISO 9001 certified facility and feature a "Standard" T-Bolt style clamping mechanism to ensure a tight, leak-free seal.
DETAILED SPECIFICATIONS:
| Clamp Material Type | 304 Stainless |
| Compatible V-Band Flange OD | 3.570" |
| Matching Tube Size (OD) | 3.000" |
| Clamp Bandwidth |
0.750" |
| Clamp Type | V-Band, Standard T-Bolt |
| Fastener Size | 8mm-1.5 |
|
|
Non-Locking Nut (QTY: 1) |
NOTE: Our V-Band Clamps are supplied with two types of nuts: a Zinc plated metal lock nut and a zinc plated non-locking hex nut. The Zinc plated lock nut ensures that your clamp stays locked in placed during harsh conditions on the street, strip, and track. The zinc plated non-locking hex nut is provided so that the clamp can be used in mock-up, fitment, and pre-installation situations where a lock nut is not required. The non-locking hex nut will not lock in place during use to ensure that the threaded portion of the clamp will not be damaged.
Disclaimer: Our 3.0-inch V-Band clamps are supplied with a lock nut and a standard non-locking hex nut. The metal lock nut is a locking-style nut and is not intended to be used during mock-up. Attempting to thread, remove, and re-thread the lock nut may cause damage to the "T-Bolt" section of the clamp. In some cases, excessive force can damage and/or break the "T-Bolt" section of the 3.0" exhaust v-band clamp. If you intend to use our clamps during the mock-up process please use a non-locking hex nut.