Enhanced Performance. Increase the performance of your F-150 by integrating the AEM Electronics V2 Water/Methanol Injection Kit for Forced Induction Engines - Standard Controller. This kit suppresses the detonation on all boost levels of your gasoline engine and advances ignition timing, resulting in up to 20% more power. The injection kit lowers the temperature in the air inlet by up to 100 degrees, creating higher oxygen levels that work to improve power output. The main injector is constructed of precision-machined billet-aluminum for ultimate durability and consistent functionality. The combination of these features and characteristics deliver ideal conditions essential for unlocking more power from your F-150.

Reduce Emissions and Gain Efficiency. Use the AEM Electronics V2 Water/Methanol Injection Kit to improve your engine’s performance and efficiency. The effect of water/methanol reduces carbon buildup inside your air intake system, helping to avoid premature detonation and lessening fuel consumption. While experiencing immediate power gains you will also realize lower fuel costs over time.

Injection System Monitoring. For your engine to perform optimally, the temperature in the air inlet chamber should be as low as possible. Upgrading to the AEM Electronics V2 Water/Methanol Injection Kit will achieve this critical function while helping you monitor the status of your engine, giving you visual control when fluid issues occur or errors are detected.

Warranty Information. AEM offers a one year manufacturer warranty on all components included in the Water/Methanol Kit.

Application. The V2 Water/Methanol Injection Kit for Forced Induction Engines is designed to fit all 1997 - 2019 F-150s.

AEM Electronics V2 Water/Methanol Injection Kit for Forced Induction Engines - Standard Controller (97-19 F-150)

AEM

AEM Electronics Water/Methanol Injection Inline Filter (97-19 F-150)

$33.99 $28.49 Save $5.50

Features & Details

Filters Water/Methanol Supply
Prevents Contamination of Water/Methanol Mixture
No Significant Reduction in Flow
Filters Particulates Down to 40 Microns
Stainless-Steel Mesh Strainer
Rugged Polypropylene
Fully Serviceable
Installs Using 1/4" OD Tubing
12-Month Limited Warranty
Fits Most Water/Methanol Systems on All 1997-2018 Ford F-150s

Long-Term Protection for Pump and Engine. Don’t let contamination of the water/methanol mixture in your water/methanol injection system damage the engine or injection pump in your Ford F-150. The AEM Electronics Water/Methanol Injection Inline Filter filters out particulates down to 40 microns, ensuring the mixture is clean and your pump and engine can make full, healthy use of the benefits of water/methanol injection.

Rugged Build, Fully Serviceable. The AEM Electronics Water/Methanol Injection Inline Filter is made from rugged, long-lasting polypropylene. The entire assembly is fully serviceable, allowing for regular disassembly, cleaning, and reuse.

Safety and Regulations. Installation and use of water/methanol systems entails significant health risks. This product is legal for use only on racing vehicles and never for use on the public highway. AEM recommends strongly that users never exceed a methanol concentration of 50% when using AEM Water/Methanol systems or components.

Installs to Nearly All Systems. The AEM Electronics Water/Methanol Injection Inline Filter installs to almost every water/methanol injection system on the market today using 3/4” OD tubing. Installed inline before the water/methanol pump, it provides protection for internal parts of both the pump and engine. It is the installer’s responsibility to ensure this product is only used in compliance with all instructions and warnings, as well as all applicable regulations and laws.

12-Month Limited Warranty. AEM warrants that this filter will be free of defects in material and workmanship for 12 months from the date of purchase.

Application. The Water/Methanol Injection Inline Filter fits most water/methanol injection systems on Ford F-150s from 1997–2018.

AEM Electronics Water/Methanol Injection Inline Filter (97-19 F-150)

AEM

AEM Electronics V2 Water/Methanol Injection Kit for Force Induction Engines - Multi-Input Controller (97-19 F-150)

$525.99 $438.54 Save $87.45

Features & Details

Boosts Overall Engine Performance
Water/Methanol Injection System
Hardwearing High Pressure Injection Pump
Reusable Nozzle and Injector
Smooth and Quiet Injection Pump
Effectively Lowers Temperatures of Air Inlet Charge Up To 100°F
Enhances Boot Pressure by Lowering Detonation
Incorporated Boost Safe Feature
Limited 12-Months Manufacturer’s Warranty
Fits 1997 - 2019 Ford F-150 Models

Sophisticated Technology. This AEM Electronics V2 Water/Methanol Injection Kit for Force Induction Engines - Multi-Input Controller is an extremely advanced technique for suppressing harmful detonation and effectively lowering engine inlet air temperatures. This advances ignition timing and improves boost without utilizing high-octane racing fuel for power gains of up 20%.

Durable High Pressure Injection Pump. The AEM water/methanol injection pump does not cycle off and on, providing quiet and smooth operation. It has a robust design including a Santoprene diaphragm, EPDM seals, and integral hose fittings that provide consistent and reliable fluid delivery.

Simple Wiring. This AEM water/methanol injection kit is designed to be relatively easy to wire and install.

Warranty. This Water/Methanol Injection Kit comes with a limited 1-year manufacturer’s warranty to cover for structural or material defects.

Application. This Water/Methanol Injection Kit for is designed to perfectly fit 1997-2019 Ford F-150 models.

Notes: Legal only for racing vehicles which are not to be used upon a public road or highway.

AEM

AEM Electronics V2 Water/Methanol Injection Kit for Force Induction Engines - Multi-Input Controller (97-19 F-150)

$525.99 $438.54 Save $87.45

Features & Details

Boosts Overall Engine Performance
Water/Methanol Injection System
Hardwearing High Pressure Injection Pump
Reusable Nozzle and Injector
Smooth and Quiet Injection Pump
Effectively Lowers Temperatures of Air Inlet Charge Up To 100°F
Enhances Boot Pressure by Lowering Detonation
Incorporated Boost Safe Feature
Limited 12-Months Manufacturer’s Warranty
Fits 1997 - 2018 Ford F-150 Models

Sophisticated Technology. This AEM Electronics V2 Water/Methanol Injection Kit for Force Induction Engines - Multi-Input Controller is an extremely advanced technique for suppressing harmful detonation and effectively lowering engine inlet air temperatures. This advances ignition timing and improves boost without utilizing high-octane racing fuel for power gains of up 20%.

Durable High Pressure Injection Pump. The AEM water/methanol injection pump does not cycle off and on, providing quiet and smooth operation. It has a robust design including a Santoprene diaphragm, EPDM seals, and integral hose fittings that provide consistent and reliable fluid delivery.

Simple Wiring. This AEM water/methanol injection kit is designed to be relatively easy to wire and install.

Warranty. This Water/Methanol Injection Kit comes with a limited 1-year manufacturer’s warranty to cover for structural or material defects.

Application. This Water/Methanol Injection Kit for is designed to perfectly fit 1997-2018 Ford F-150 models.

Notes: Legal only for racing vehicles which are not to be used upon a public road or highway.

AEM

AEM Electronics V2 Water/Methanol Injection 5 Gallon Tank Kit w/ Conductive Fluid Level Sensor (97-19 F-150)

$180.99 $150.66 Save $30.33

Features & Details

5 Gallon Tank Kit
Compatible With Both Water and Methanol Injectors
Conductive Fluid Level Sensor
Includes Baffles That Eliminate Fluid Slosh
¼” O.D. Hose
Positive Lock Connector & Color-Matched Wires Included
Low Fluid Indicator
Direct Installation
1-Year Limited Warranty
Fits all 1997 to 2018 Ford F-150 Models

Enhanced Operating Range. Do you wish to enhance your Ford F-150’s operating range? If so, consider installing V2 Water/Methanol Injection 5 Gallon Tank Kit from AEM Electronics with Conductive Fluid Level Sensor. By virtue of being a large gallon tank, it significantly increases the methanol or methanol capacity of your truck thus boosting its extended range. With it, you can also track your engine’s intake thus negating the need for you to worry about your truck’s performance during intense driving applications.

Better Cooling Capacity. AEM Electronics built a 5-gallon tank that has a significantly larger capacity. Therefore, you will have enough coolant more so when off-roading or towing loads. A low fluid conductive liquid sensor monitors fluid levels and also alerts you when the levels in the tank are low.

Engine Longevity. V2 Water/Methanol Injection 5 Gallon Tank Kit from AEM Electronics helps enhance your engine’s longevity by cooling it off during high-performance applications. In doing so, it similarly boosts your performance.

Simple Installation. Despite its large capacity, AEM Electronics’ V2 Water/Methanol Injection 5 Gallon Tank has a compact design that makes installation relatively easy. Simple tools are needed during installation with the process taking approximately 30 minutes. Mounting hardware including a positive lock connector and color-matched wiring are included in the packaging. An installation guide is also included.

Warranty. AEM Electronics provides a 1-Year warranty that covers workmanship and materials defects.

Application. AEM Electronics V2 Water/Methanol Injection 5 Gallon Tank by fits all 1997 to 2018 Ford F-150 Models.

Features & Details

Features & Details

Features & Details

Features & Details

Features & Details

Sign Up For email discounts