Features & Details
- Reduces Blow-By and Engine Sludge
- Version 3.0 - 3 oz. Capacity
- Aluminum Honeycomb Filter with Fine Mesh Screen
- Solid Billet Aluminum Construction
- Clear Anodized Satin Finish
- Passengers Side (PCV Side) Kit
- Easy, Straight Forward Installation
- Not CARB-Approved
- Fits 2011-2017 2.7L EcoBoost, 5.0L and 6.2L F-150s and 2011-2019 3.5L EcoBoost F-150s
Fuel and Oil Don't Mix. Crankcase pressures can force oil into the combustion chambers through the PCV circuit. The JLT solution is to catch the oil in the flow before it can make it into the cylinders, where it might dilute fuel and decrease octane levels. The JLT oil separator prevents the oil fumes in your engine's crankcase vent flow from entering the intake tract.
Version 3.0. JLT improved on the designed of their old Oil Separator with the introduction of their new and improved Version 3.0. The first big change you will notice is that the Version 3.0 Separator has a larger 3 ounce capacity, which is almost double that of their previous model. Another important difference is the filter media. Older JLT Separators used a Ford Motorcraft pre-filter, but now JLT uses a 1/2" thick 1/16th" aluminum honeycomb filter with a mesh stainless steel screen to trap even more fine oil vapors than before to prevent them from gumming up your engine.
Superior Quality. Proudly manufactured right here in the USA, this JLT Performance Air/Oil Separator is CNC-machined from a solid block of billet aluminum for superior strength. Designed with a rubber o-ring, this Separator will maintain a tight leak-free seal. The base features a knurled texture, so that it can easily be gripped for removal during routine oil changes. JLT then completes their Catch Can in a durable clear anodized satin finish for impressive good looks and long lasting corrosion resistance.
Easy Straight Forward Installation. JLT designed their Separator to be an easy straight forward install that can be completed in under 30 minutes using basic hand tools. The included PCV silicone hoses feature pre-attached stock-style quick-disconnect fittings making JLT's Catch Can a true plug-n-play upgrade. All the necessary brackets and hardware are included with no cutting or extra modifications required.
Not CARB Certified. This JLT Performance Air/Oil Separator is not CARB certified at this time; therefore, it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.
Application. This Satin JLT V3.0 Oil Separator is specifically designed to be used on the passenger side of the 2011-2017 2.7L EcoBoost, 5.0L and 6.2L F-150s and 2011-2019 3.5L EcoBoost F-150s.