There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
88 thru 89 HONDA Accord Coupe 2.0 LXi
Product Features:
Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Epa: N/A
Carb Acknowledgement Required: f
Fits According to Mfg but not guarunteed.
1986 Acura Legend Base
1987 Acura Legend Base
1987 Acura Legend L
1987 Acura Legend LS
1988 Acura Legend Base
1988 Acura Legend L
1988 Acura Legend LS
1988 Honda Accord DX
1988 Honda Accord LX
1988 Honda Accord LXi
1988 Honda Prelude 2.0 S
1988 Honda Prelude 2.0 Si
1988 Honda Prelude 2.0 Si 4WS
1989 Acura Legend Base
1989 Acura Legend L
1989 Acura Legend LS
1989 Honda Accord DX
1989 Honda Accord LX
1989 Honda Accord LXi
1989 Honda Accord SEi
1989 Honda Prelude 2.0 S
1989 Honda Prelude 2.0 Si
1989 Honda Prelude 2.0 Si 4WS
1990 Acura Integra GS
1990 Acura Integra LS
1990 Acura Integra RS
1990 Acura Legend Base
1990 Acura Legend L
1990 Acura Legend LS
1990 Honda Civic Base
1990 Honda Civic DX
1990 Honda Civic EX
1990 Honda Civic LX
1990 Honda Civic RT 4WD
1990 Honda Civic Si
1990 Honda Prelude 2.0 S
1990 Honda Prelude 2.0 Si
1990 Honda Prelude Si
1990 Honda Prelude Si 4WS
1990 Honda Prelude Si ALB
1991 Acura Integra GS
1991 Acura Integra LS
1991 Acura Integra RS
1991 Honda Civic Base
1991 Honda Civic DX
1991 Honda Civic EX
1991 Honda Civic LX
1991 Honda Civic RT 4WD
1991 Honda Civic Si
1991 Honda Prelude 2.0 Si
1991 Honda Prelude Si
1991 Honda Prelude Si 4WS
1991 Honda Prelude Si ALB
1992 Acura Integra GS
1992 Acura Integra GS-R
1992 Acura Integra LS
1992 Acura Integra RS
1992 Honda Civic CX
1992 Honda Civic DX
1992 Honda Civic EX
1992 Honda Civic LX
1992 Honda Civic Si
1992 Honda Civic VX
1993 Acura Integra GS
1993 Acura Integra GS-R
1993 Acura Integra LS
1993 Acura Integra RS
1993 Honda Civic CX
1993 Honda Civic DX
1993 Honda Civic EX
1993 Honda Civic LX
1993 Honda Civic Si
1993 Honda Civic VX
1994 Acura Integra GS-R
1994 Acura Integra LS
1994 Acura Integra RS