2011-2014 3.7 L V6 Mustang Mafia Single Turbo Kit 600+ rwhp capable
Auto Mafia Racing S197 3.7L Cyclone Single Turbo Kit.
Built in Arcadia, Florida, USA.
All kits are built to order per your specifications. For an ETA email us at Support@AutoMafiaRacing.com or call 941-979-1132
What comes in the kit?
VS Racing 6766 Turbo - Rated at 850 rwhp
or COMP 6875 Air Cooled Triple Ceramic Ball Bearing Turbo 1000+ rwhp
VS Racing 50mm BOV
Turbosmart Race Port Blow off Valve
VS Racing 50mm Wastegate
or Turbosmart Gen V Hypergate 45 Wastegate
Standard Injectors - Ford Racing MU52 - Good for roughly 450 rwhp on 93. or
Fuel Injector Clinic FIC 1000cc Fuel Injectors good for 750 on E85
31" x 12" x 4" Racing Intercooler Supports over 1000 rwhp
Black 3" Aluminum Cold Side. Black Couplers. 2.5 and 3 inch with T Bolt Clamps
6 x NGK 6510 Spark Plugs (Gap to .028 when you get them)
DW400 - DW9-401-1046 Good for E85/Race Fuel and 600+ rwhp
-4AN Oil Feed Hose -4 AN Vibrant Oil Restrictor Fitting Billet Oil Drain 10 AN to 1/2 Barb Fitting for Oil Drain Lengths of 1/2 Rubber Hose for drain and vacuum setup AMR CNC'd T4 to 2.5 inch Stainless Steel Flange AMR CNC'd Stainless Steel 1/2 inch exhaust port flange Turbosmart Boost Controller 0-30 Boost / Vacuum Gauge Vibrant / K&N Air Filter Lava Exhaust Wrap Wiring Heat Loom Fuses and Relays and Ring Terminals Grade 8 Bolts and Hardware for Turbo and Oil Pump Vacuum Lines Intercooler Mounting Brackets Marine Grade Oil Pump Mounting Kit for Oil Pump AMR CNC'd Billet Oil Fill / Turbo Oil Return Cap Fittings for Oil Return - NO NEED TO TAP PAN High Pressure Oil Feed Fitting (NO SANDWHICH PLATES)
Comp Turbo 5858 Drop In Turbo for 2015+ 2.3L EcoBoost Mustangs
Comp Turbo 5858 Drop In Turbo for 15+ 2.3 EcoBoost Mustangs Replace your standard tired old turbo with this Billet Triple Ceramic Ball Bearing Turbo from Comp Turbo!
Great VALUE! Check out the STANDARD Features! Polished Billet CNC Center Section 2 Year Unlimited Mile Warranty Polished Front Housing Black Powder Coated Rear Housing Billet Compressor Wheel Comes STANDARD with Turbosmart Wastegate Actuator
We are running this Turbo on Watch My Ecos EcoBoost Mustang and making killer power!
Check out the video below where we dyno'd the turbo on 93 octane and made 417 rwhp
Check out this video where we bumped it up to E40 and made 507 rwhp and 503 ft lbs of torque.
NPG 3.7 Cyclone Single Turbo Kit 2011-2014 Ford Mustang V6 **USED OFF PROJECT HURRICANE**
**USED OFF PROJECT HURRICANE** - Kit is removed and can ship with a few days. we will make sure its all there!
Here is what is in the kit:
Comp 6875 Water Cooled Oilless T4 Turbo
Turbosmart 45mm HyperGate Wastegate - V-Band Connectors in Stainless
Tial 50mm Blow Off Valve (BOV) with 10 psi spring
Vibrant 3.5" High Efficiency Vertical Flow Intercooler Core Custom Welded to Spec
Aluminum Custom Coolant Tank and Extra Fluid Tank along with all hoses and fittings and clamps needed if selected
4" Vibrant High Flow Dry Turbo Air Filter
1 3/4" Stainless Steel Mirrored Primary headers with 3 to 1 collector and 1/2" CNC Flanges
2 1/4" Stainless Steel Up Pipes with Equal Runner Length Between Banks
2 1/4" merge to 3" Collector 2 to 1 into T4 CNC Flange
3" Stainless Steel Downpipe with Wastegate Merge and Stainless VBands
All Hot Pipes are TIG Welded and back purgeed and are Cerakote Black 1800 Degree Coated
All Intercooler Piping is Powder Coated Black
All Silicone Couplers are Vibrant and Black
Turbo is Supported by a Billet Brace
Intercooler comes with all brackets and fastners
No Cutting Required - OEM Coolant Overflow is moved with supplied bracket
Kit retains crash bar, spash guards, full ac, and street livability.
WE WILL INCLUDE FREE SHIPPING AND FREE EMAIL TUNING.
This is a full tuner kit meaning you still need to purchase the following to make the car perform at its best.
These are ALL of the items we use and with E85 and 14 psi to make over 600 rwhp.
Turbonetics NX2 Drop in Turbo Upgrade Kit Mustang EcoBoost 2.3L
FORD MUSTANG 2.3L ECOBOOST
We will have these 1in stock at our shop early September to start shipping them out to you all!
TURBINE HOUSING INLET/OUTLET
P/N DUAL CERAMIC BALL BEARING
(NX2 Billet) 52mm
(NX2 Inconel) 52mm
Investment Cast Stainless Twin Scroll .70 a/r
Direct drop in replacement (easy install, no adaptors needed) installs without modifications • High efficiency NX2 compressor & turbine wheels (more horsepower better response, less lag) • Dual Ceramic Ball Bearing (durability and response) • Investment Cast HK30 Stainless turbine housing (designed to withstand high temperatures) • Divided twin scroll turbine housing (improved throttle response) • Ported shroud compressor housing for enhanced compressor map width (low rpm response with increased top end performance) • Includes new gaskets and silicone couplers including 3” in for popular intakes (aftermarket or stock intake systems) • Capable of 520hp with supporting mods (with custom tune) • 1 year No Fault- No Hassle Warranty
90whp Increase with the following mods:
Aftermarket Intake, Full exhaust w/ high flow cats, Aftermarket Intercooler, PCV / Catch Can Upgrade and COBB Accessport
Stock Boost Level of 20psi
*Tune/tuner required which is not included with turbo
Watch this turbo make over 500+ rwhp on our dyno!
Full Speed Ahead
S550 Blackbird Twin Turbo Kit - ALL OUT RACE KIT 1500+ RWHP (15+ GT & GT350)
Blackbird TwinTurbo System (ALL OUT RACE) 2015+ Mustang GT & GT350
KIT ARE MADE TO ORDER - Ship within 60 days of order completion. NO REFUNDS OR CANCELLATIONS ONCE ORDER HAS BEEN PLACED Do you want the best and baddest kit on the market? This is it. We include everything you need to easily break the the 1000 rwhp mark! Add a clutch and a built engine and crank it to 1500+ RWHP. All Tuning and Fuel supporting items are in this kit! It is FULLY OPTIONED!
For Off-Road Use Only
* More power at lower boost levels than any Supercharger on the market (1500 rwhp capable kit as optioned) * Custom V Band Turbo Manifolds (Designed for Turbos) * No cutting or relocation of stock parts * Lower under hood temperatures than any Top mount system or Supercharger * 100% made and assembled in the U.S.A.
* Full Technical Support via email or phone
**Piping has a LIFETIME Warranty**
***2 Year Warranty on Turbos***
*(2) Turbo Manifolds w/V-Band Connections *(2) COMP Oil FreeTurbos your size choice *(2) Tial 44mm wastegates *(2) Tial Blow off valves *(1) Bell Intercooler 4.5″ core *(2) 2″ Intercooler Pipes *(1) 3.5″ pipe from I/C to throttle body *(2) 3″ Cold air intakes with Filters *(2) O2 extensions *(1) Oil Sump pan
*(8) ID1700X Injectors
*(1) Tuning Device (nGauge or SCT X4)
*(1) Tune from Rob Shoemaker or Sai Li or VMP Tuning
*(1) Sai Li Triple Hat Fuel Pump Kit (Rated at 1500+ rwhp) Triple Fuel Pumps, Fuel hat, Fuel lines, fuel fittings, adapters, fuel pressure regulator, fuel pressure gauge, fuel pumps wiring harness.
Warranty Contact Info: If you purchased your FSA Turbo parts from FSA Directly, and have a warranty concern or question, please contact us via phone at (619) 363-2179. or via email at email@example.com
FSA Turbo Systems Warranty FULL SPEED AHEAD, LLC shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product sold. If you have any questions regarding a product or installation, please contact FSA Turbo Direct at 619-363-2179 from 9:00 a.m. to 5:00 p.m. PST, Monday through Friday.
It is the goal of FSA Turbo, LLC to give our customers the highest quality products available. FSA warrants each new product, except FSA Titanium to be free from defects in both workmanship and material for a period of two (2) years from the date of purchase, provided that the product is properly installed, subjected to normal use and service and that the product is not modified or changed in any way, nor damaged because of negligence by customer or installer or used for racing or competition purposes. Customers who believe they have a defective product should either return it to the dealer from which it was purchased or ship it directly to FSA Turbo, LLC along with proof of purchase and a complete description of the problem. The product must be returned freight prepaid. If a thorough inspection of the product by the factory indicates defects in workmanship or material, the FSA Turbo, LLCs sole obligation shall be to repair or replace the product. Warranty covers only the product itself and not the cost of installation or removal. FSA TURBO SYSTEMS STANDARD WARRANTY It is the constant endeavor of the FSA, LLC to give our customers the highest quality products obtainable. FSA Turbo warrants each new Turbo System to be free from defects in both workmanship and material for a period of two (2) years from the date of purchase, provided that the product is properly installed, subjected to normal use and service and that the product is not modified or changed in any way, nor damaged because of negligence by customer or installer or used for competition use. Warranty covers only the product itself and not the cost of installation, removal or shipping costs.
LS Universal Turbo Headers Foward Facing (LS1, LS2, LS3, LS6)
Speed Engineering headers are made out of 304 stainless steel and offer great quality, performance, and affordability. Our headers are mandrel bent, tig welded, and feature polished stainless steel construction. All of our headers have been dyno proven. We stand behind our headers in saying you will not find a better fitting, quality built, budget header for your vehicle.