There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
93 thru 97 FORD Probe 2.0 16v
Product Features:
Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Epa: N/A
Carb Acknowledgement Required: f
Fits According to Mfg but not guarunteed.
1993 Ford Probe Base
1993 Ford Probe GT
1993 Ford Probe SE
1993 Mazda 626 DX
1993 Mazda 626 ES
1993 Mazda 626 LX
1993 Mazda MX-6 Base
1993 Mazda MX-6 LS
1994 Ford Probe Base
1994 Ford Probe GT
1994 Ford Probe SE
1994 Mazda 626 DX
1994 Mazda 626 ES
1994 Mazda 626 LX
1994 Mazda MX-6 Base
1994 Mazda MX-6 LS
1995 Ford Probe Base
1995 Ford Probe GT
1995 Ford Probe SE
1995 Mazda 626 DX
1995 Mazda 626 ES
1995 Mazda 626 LX
1995 Mazda MX-6 Base
1995 Mazda MX-6 LS
1996 Ford Probe Base
1996 Ford Probe GT
1996 Ford Probe SE
1996 Mazda 626 DX
1996 Mazda 626 ES
1996 Mazda 626 LX
1996 Mazda MX-6 Base
1996 Mazda MX-6 LS
1996 Mazda MX-6 M Edition
1997 Ford Probe Base
1997 Ford Probe GT
1997 Ford Probe GTS
1997 Mazda 626 DX
1997 Mazda 626 ES
1997 Mazda 626 LX
1997 Mazda MX-6 Base
1997 Mazda MX-6 LS
1998 Mazda 626 DX
1998 Mazda 626 ES
1998 Mazda 626 LX
1999 Mazda 626 ES
1999 Mazda 626 LX
2000 Mazda 626 ES
2000 Mazda 626 LX
2001 Mazda 626 ES
2001 Mazda 626 LX
2002 Mazda 626 ES
2002 Mazda 626 LX