There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
91 thru 97 MERCURY Tracer 1.9 (9.3 inch front rotor)
Product Features:
Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Epa: N/A
Carb Acknowledgement Required: f
Fits According to Mfg but not guarunteed.
1990 Mazda 323 Base
1990 Mazda 323 SE
1990 Mazda Protege 4WD
1990 Mazda Protege LX
1990 Mazda Protege SE
1991 Ford Escort Base
1991 Ford Escort GT
1991 Ford Escort LX
1991 Ford Escort LX Sport
1991 Mazda 323 Base
1991 Mazda 323 SE
1991 Mazda Protege 4WD
1991 Mazda Protege DX
1991 Mazda Protege LX
1991 Mercury Tracer Base
1991 Mercury Tracer LTS
1991 Mercury Tracer Trio
1992 Ford Escort Base
1992 Ford Escort GT
1992 Ford Escort LX
1992 Ford Escort LX Sport
1992 Ford Escort LX-E
1992 Mazda 323 Base
1992 Mazda 323 SE
1992 Mazda Protege DX
1992 Mazda Protege LX
1992 Mercury Tracer Base
1992 Mercury Tracer LTS
1992 Mercury Tracer Trio
1993 Ford Escort Base
1993 Ford Escort GT
1993 Ford Escort LX
1993 Ford Escort LX Sport
1993 Ford Escort LX-E
1993 Mazda 323 Base
1993 Mazda 323 SE
1993 Mazda Protege DX
1993 Mazda Protege LX
1993 Mercury Tracer Base
1993 Mercury Tracer LTS
1993 Mercury Tracer Trio
1994 Ford Aspire Base
1994 Ford Aspire SE
1994 Mazda 323 Base
1994 Mazda Protege Base
1994 Mazda Protege DX
1994 Mazda Protege LX
1994 Mercury Tracer Base
1994 Mercury Tracer LTS
1994 Mercury Tracer Trio
1995 Ford Aspire Base
1995 Ford Aspire SE
1995 Mazda Protege DX
1995 Mazda Protege ES
1995 Mazda Protege LX
1995 Mercury Tracer Base
1995 Mercury Tracer LTS
1995 Mercury Tracer Trio
1996 Ford Aspire Base
1996 Mazda Protege DX
1996 Mazda Protege ES
1996 Mazda Protege LX
1996 Mercury Tracer Base
1996 Mercury Tracer LTS
1996 Mercury Tracer Trio
1997 Ford Aspire Base
1997 Mazda Protege DX
1997 Mazda Protege ES
1997 Mazda Protege LX
1997 Mercury Tracer GS
1997 Mercury Tracer LS
1997 Mercury Tracer Trio
1998 Mazda Protege DX
1998 Mazda Protege ES
1998 Mazda Protege LX