There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports; muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. Redstuff pads also reduce rotor w
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
62 thru 71 AUSTIN-HEALEY Sprite (Steel Wheels)
Product Features:
Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Epa: N/A
Carb Acknowledgement Required: f
Fits According to Mfg but not guarunteed.
1962 Austin Healey Sprite Base
1963 Austin Healey Sprite Base
1963 MG Midget Base
1964 Austin Healey Sprite Base
1964 MG Midget Base
1965 Austin Healey Sprite Base
1965 MG Midget Base
1966 Austin Healey Sprite Base
1966 Austin Healey Sprite MK IV
1966 MG Midget Base
1967 Austin Healey Sprite Base
1967 MG Midget Base
1968 Austin Healey Sprite MK IV
1968 MG Midget Base
1969 Austin Healey Sprite MK IV
1969 MG Midget Base
1970 Austin Healey Sprite MK IV
1970 MG Midget Base
1971 MG Midget Base
1972 MG Midget Base
1973 MG Midget Base
1974 MG Midget Base
1975 MG Midget MK IV
1975 Triumph TR7 Base
1976 MG Midget MK IV
1976 Triumph TR7 Base
1977 MG Midget MK IV
1977 Triumph TR7 Base
1978 MG Midget MK IV
1978 Triumph TR7 Base
1979 MG Midget MK IV
1979 Triumph TR7 Base
1980 Triumph TR7 Base
1981 Triumph TR7 Base