There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
FORD Saleen Mustang Alcon front calipers
Product Features:
Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Epa: N/A
Carb Acknowledgement Required: f
Fits According to Mfg but not guarunteed.
1964 Ford Mustang Base
1965 Ford Mustang Base
1966 Ford Mustang Base
1967 Ford Mustang Base
1968 Ford Mustang Base
1969 Ford Mustang Base
1970 Ford Mustang Base
1970 Ford Mustang Grande
1970 Ford Mustang Mach 1
1971 Ford Mustang Base
1971 Ford Mustang Grande
1971 Ford Mustang Mach 1
1972 Ford Mustang Base
1972 Ford Mustang Grande
1972 Ford Mustang Mach 1
1973 Ford Mustang Base
1973 Ford Mustang Grande
1973 Ford Mustang Mach 1
1974 Ford Mustang II Base
1975 Ford Mustang II Base
1976 Ford Mustang II Base
1977 Ford Mustang II Base
1978 Ford Mustang II Base
1979 Ford Mustang Base
1980 Ford Mustang Base
1981 Ford Mustang Base
1982 Ford Mustang GL
1982 Ford Mustang GLX
1982 Ford Mustang L
1983 Ford Mustang GL
1983 Ford Mustang GLX
1983 Ford Mustang L
1983 Ford Mustang Turbo GT
1994 Ford Mustang Base
1995 Ford Mustang Base
1996 Ford Mustang Base
1997 Ford Mustang Base
1998 Ford Mustang Base
1999 Ford Mustang Base
2000 Ford Mustang Base
2001 Ford Mustang Base
2002 Ford Mustang Base
2003 Ford Mustang Base
2004 Ford Mustang Base
2004 Mitsubishi Lancer ES
2004 Mitsubishi Lancer Evolution
2004 Mitsubishi Lancer LS
2004 Mitsubishi Lancer OZ Rally
2004 Mitsubishi Lancer Ralliart
2004 Mitsubishi Lancer Sportback
2004 Mitsubishi Lancer Sportback Ralliart
2005 Mitsubishi Lancer ES
2005 Mitsubishi Lancer Evolution
2005 Mitsubishi Lancer Evolution MR
2005 Mitsubishi Lancer Evolution RS
2005 Mitsubishi Lancer OZ Rally
2005 Mitsubishi Lancer Ralliart