Premium Modified, Ported, and Calibrated Throttle Body.
F-150 MODEL / YEARS:
F-150 5.0L (2021–2025)
Requires Adapter: P/N: SE-FMCO-95-85 to fit on OEM Manifold
Note:
All stock GT350 intake manifolds will require an adapter - P/N: SE-FMCO-95-87GT350.
Does not require an adapter if GT350 intake manifold is ported to at least 93mm at the inlet (gasket will be provided).
Important:
Requires aftermarket Cold Air Intake — does not fit on stock CAI.
Additional Fitment Information:
An aftermarket Cold Air Intake (CAI) or duct/coupler of approximately 4-inch diameter is recommended as the clamping surface is much larger at the throttle body inlet. It will not fit the stock/OEM duct on F-150.
Mounts with connector towards the passenger side.
Performance:
The classic ported throttle body, 1350 SCFM @ 20” H2O at WOT.
FEATURES:
- Optimized Active Contours with sonic flow nozzles.
- Porting Taper and Upstream Bore with Velocity Stack.
- Greater Discharge Coefficient of Plate/Blade interface.
- 16 Ra Microinch, Diamond Polished Surface Finish.
- Self-Cleaning Throat/Flow Gap.
- Dimpled shaft trailing edge.
BENEFITS:
- Lower weight-to-power ratio at part throttle, for a more nimble and spirited driving experience.
- Linearization and smoothing of the curve for a more predictable response and crisper shifts.
- Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble).
- More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications.